FAST is Professor Joshua M. Pearce's research group at Western University in London, Ontario. We design low-cost, open-source hardware and release it under free and open-source licences, so that others can build it, repair it and adapt it.
Each project below has a page on our website, uwo-fast.github.io, rendered from the repository's own documentation.
- open-source-bioreactor: a parametric OpenSCAD bioreactor built on glass jars from 1.5 L to 6.5 gal.
- openreactor: supervise bench-scale reactors from a Raspberry Pi, with sensor logging, heater and motor setpoints, and recorded runs in a web interface.
- syringe-actuator: a printed crank that strokes a 1 to 30 mL luer syringe's plunger back and forth from a gearmotor that never reverses.
- mass-scale: a 3D-printed digital scale with a load cell, an HX711 and an Arduino Nano, read over serial for data logging.
- well-plate-guide: a parametric OpenSCAD guide that steers a pipette tip into the centre of each well of a standard well plate.
- ambb: a 3D-printed, solderless adapter that plugs an 8-SOIC chip into a breadboard like a DIP part.
- feedstock-hopper: a parametric, printable hopper for plastic pellets and shredded regrind.
- desktop-sheet-press: control electronics, firmware and enclosure for a heated scientific sheet press.
- pipe-fitting-scad: a parametric OpenSCAD generator for threaded pipe couplings.
- nasopharyngeal-swab: a parametric swab printed in resin, with a handle printed on an FFF printer.
- uv-curing-box: a modular UV LED curing box built from identical LED boards and printed brackets.
- farm-tools-scad: parametric OpenSCAD designs for small-scale farming tools.
- Solar photovoltaics: SAMA, the Solar Alone Multi-objective Advisor.
- The lab's safety signs are published at uwo-fast.github.io/signs.
- More of the group's work, past and present, is on its Appropedia page.
- Each repository states its own licence; the licensing policy sets the default for new ones.
