Reverse-engineered, actually-tested notes for Ai-Thinker (安信可) development boards — the stuff the vendor datasheet doesn't tell you: real pinouts, flashing procedures, the traps, and the exact firmware/tool versions that work.
Every entry here was verified on physical hardware, with raw serial transcripts kept alongside the notes.
| Module | Chip | Status | Notes |
|---|---|---|---|
| Ai-WB1-32S-CAM | Winner Micro W800 | ✅ Working | Wi-Fi + BLE camera board with GC032A sensor. Not an ESP32. Needs a firmware flash to make the camera work. |
AI-Thinker/
└── Ai-WB1-32S-CAM/
├── README.md complete getting-started guide
├── firmware/
│ └── w800_Ai_WB1_32S_CAM_V1.3.fls camera firmware (working build)
├── tools/
│ └── Upgrade_Tools_V1.4.18.exe W800 UART flasher (Windows)
└── docs/
└── at-probe-log.md raw serial transcripts from a real board
Each module folder is self-contained: open its README.md and follow it top to bottom.
Ai-Thinker boards are cheap and capable, but many ship with generic firmware that doesn't exercise the board's headline feature — and resellers mislabel them ("ESP32-CAM compatible") so that the obvious tutorials all fail. Check the chip on the module before assuming an ecosystem:
- W800 / W600 → Winner Micro toolchain (WM IoT SDK), not Espressif
- BL602 / BL604 → Bouffalo, not Espressif
- ESP32- prefix in the part number → actually Espressif
Found a board that works, or a fix for one documented here? Open an issue or a PR with the raw serial transcript — evidence beats guesswork.
Firmware and vendor tools are the property of Shenzhen Ai-Thinker Technology Co., Ltd. They are mirrored here only so the exact working versions stay available. All rights remain with their owners. Flashing overwrites device firmware — proceed at your own risk, no warranty of any kind.