Skip to content
Merged
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
8 changes: 8 additions & 0 deletions README.md
Original file line number Diff line number Diff line change
Expand Up @@ -231,6 +231,14 @@ the closed-side stop) and stops there before the hold takes over.
- **The jaws stay compliant.** An external push back-drives them while the motor keeps pushing
with `force_n`, and an empty `grasp()` closes onto the mechanical stop at that force. That is
the price of a force that does not drift when the workpiece moves.
- **Below about 2.2 N the jaws may not close at all**, so keep `force_n` at 3 N or more. The
closing leg's torque budget *is* the setpoint, and the mechanism needs about 0.2 Nm — 2.2 N of
setpoint — to break away from static friction. Under that the approach never moves, and
`grasp()` refuses the hand-over rather than reading the stillness as contact: `ok=False`,
`no_bite=True`, torque dropped, no hold frames. That refusal is the safe answer to a grip that
could not have closed; the alternative, handing over to a hold that presses at a slightly higher
torque, walks the jaws across the free stroke. Between 2.2 N and about 3 N it closes, but on this
bench the grip is marginal, so 3 N is the number to ask for.
- **Below about 3.7 N the approach speed becomes the limit**, because one frame of travel at
`grasp_speed_mm_s` already spends the whole torque budget. Cap the travel time with
`grasp_speed_mm_s` rather than asking for a force the mechanism's own friction absorbs.
Expand Down
6 changes: 6 additions & 0 deletions README.zh-CN.md
Original file line number Diff line number Diff line change
Expand Up @@ -199,6 +199,12 @@ print(state.position_mm, state.force_n, state.timestamp)
几何。把 `force_n` 当成一个**可重复**的档位,不要当成标定过的测量值。
- **爪子是柔顺的。** 外力可以把它们推回去,而电机仍用 `force_n` 顶着;空爪 `grasp()` 就是用
这个力顶到机械限位上。这就是「工件移动时力不漂」的代价。
- **小于约 2.2 N 时夹爪可能根本闭不上**,`force_n` 请保持在 3 N 以上。闭合段的力矩预算**就是**
设定值,而这台机构的静摩擦要压到约 0.2 Nm —— 相当于 2.2 N 的设定值 —— 才能脱离。低于它,
接近段一步都不走,`grasp()` 于是**拒掉交接**,而不是把「没动」当成接触:`ok=False`、
`no_bite=True`、撤掉力矩、一帧保力都不发。这是对「本来就闭不上的夹取」的安全回答;反过来
交接给保力段,那一段压的力矩更高,会把夹爪推着走完整个自由行程。2.2 N 到 3 N 之间能闭上,
但本机上夹得勉强,所以照着 3 N 以上设。
- **小于约 3.7 N 时,接近速度会变成限制项**,因为 `grasp_speed_mm_s` 下走一帧就已经花光了
整个力矩预算。要限制的是接近时间、改 `grasp_speed_mm_s`,不要去要求一个机构自身摩擦就能
吃掉的力。
Expand Down
Loading