Skip to content
Merged
Show file tree
Hide file tree
Changes from all commits
Commits
File filter

Filter by extension

Filter by extension

Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
37 changes: 26 additions & 11 deletions ont/ont-tplink-xz000-g7.md
Original file line number Diff line number Diff line change
Expand Up @@ -11,23 +11,38 @@ parent: TP-Link
| Vendor/Brand | TP-Link |
| Model | XZ000-G7 |
| Chipset | Faraday/Galachip GC1601 |
| CPU | ARM 32-bit |
| Flash | |
| RAM | |
| System | Linux (Kernel 3.16, uClibc) |
| HSGMII | |
| Optics | SC/APC |
| IP address | |
| Web Gui | |
| SSH | |
| Telnet | |
| Serial | |
| CPU | ARMv5l 32-bit |
| Flash | 4MB (cFeon QH32B-104HIP) |
| RAM | 32MB |
| System | Linux (Kernel 3.16.0, uClibc) |
| HSGMII | No |
| Optics | UX3320S SC/APC |
| IP address | 192.168.1.1/24 |
| Web Gui | ✅ username `admin`, password `admin` |
| SSH | ❌ |
| Telnet | ✅ Locked down CLI |
| Serial | ✅ 115200 8-N-1 |
| Form Factor | ONT |

::: info Note
This ONT uses the Faraday/Galachip GC1601 chipset, which is relatively uncommon. The device uses a custom Galachip-specific SDK. Very little public documentation exists about this chipset.
:::

# Internal Photo

<ImageFigure file="tp-link/tp-link-XZ000-G7-V1.0.jpg" alt="XZ000-G7 V1.0" caption="XZ000-G7 V1.0" />

# Flash Layout

| dev | size | erasesize | name | Notes |
| ---- | -------| --------- | ---------- | --------------- |
| mtd0 | 400000 | 1000 | "whole" | Full flash |
| mtd1 | 20000 | 1000 | "uboot" | loader + U-Boot |
| mtd2 | 170000 | 1000 | "kernel" | zImage + DTB |
| mtd3 | 240000 | 1000 | "rootfs" | Squashfs |
| mtd4 | 20000 | 1000 | "misc" | XML Config |
| mtd5 | 10000 | 1000 | "hwconfig" | MAC+BOSA config |

# Miscellaneous Links

- [TP-Link XZ000-G7 product page](https://www.tp-link.com/nordic/service-provider/gpon/xz000-g7/)
Expand Down
25 changes: 23 additions & 2 deletions ont/ont-zte-f6005.md
Original file line number Diff line number Diff line change
Expand Up @@ -20,8 +20,8 @@ parent: ZTE
| Optics | SC/APC |
| IP address | 192.168.1.1 |
| Web Gui | ✅ user `admin`, password `admin` |
| SSH | |
| Telnet | |
| SSH | Not enabled in stock firmware |
| Telnet | Not enabled in stock firmware |
| Serial | |
| Form Factor | ONT |

Expand Down Expand Up @@ -181,10 +181,31 @@ On some software versions, Password and Update Password fields are disabled and
This has been tested on the following firmware versions:
- V6.0.10P2N19 (OpenFiber)

## Enable SSH shell

Requires prior access via UART console or Telnet.

After a reboot, SSH will be permantly enabled with the username `root` and a password generated from the serial number, same as [CIG G97-CP](/ont-cig-g-97cp#login-and-enable).

```sh
#ONT>system
#ONT/system>misc
#ONT/system/misc>
#ONT/system/misc>ssh_en set 2
---ATECMDRESULT--- OK
#ONT/system/misc>ssh_en get
ssh_en: 02
---ATECMDRESULT--- OK
```

This has been tested on the following firmware versions:
- V6.0.10N20 (TIM)
- V6.0.10P4N03 (Fiberhost)

# Known Bugs

The buffer size of the hardware is suboptimal: because of this the ONT is unable to work at full speed during uploads if the server is geographically and/or latency-wise far. There are no known problems if there is only one subscriber on the GPON tree.

In versions V6.0.10N14 and V6.0.10P2N02 this problem is felt more than with newer firmware as in the new versions (V6.0.10N20, V6.0.10P2N18, V6.0.10P2N19), an attempt is made to avoid buffer filling by means of pause frames. Not all routers support pause frames and some may still suffer from problems with the latest updates.

In version V6.0.10P2N18, problems were found in download speeds with 1 Gbps links.
Expand Down
Loading
Sorry, something went wrong. Reload?
Sorry, we cannot display this file.
Sorry, this file is invalid so it cannot be displayed.
Loading