From ee4a5b3bc61f7aa6d6bfbaeb8bfc7489ee6ebece Mon Sep 17 00:00:00 2001 From: Simone <26844016+simonebortolin@users.noreply.github.com> Date: Sun, 15 Nov 2026 10:44:56 +0100 Subject: [PATCH] Revert "Revert "Add TP-Link XZ005-G6 ONT page"" --- ont/ont-tplink-xz005-g6.md | 119 +++++++++++++++++++++++++++++++++++++ 1 file changed, 119 insertions(+) create mode 100644 ont/ont-tplink-xz005-g6.md diff --git a/ont/ont-tplink-xz005-g6.md b/ont/ont-tplink-xz005-g6.md new file mode 100644 index 00000000..087b5176 --- /dev/null +++ b/ont/ont-tplink-xz005-g6.md @@ -0,0 +1,119 @@ +--- +title: TP-Link XZ005-G6 +has_children: false +parent: TP-Link +--- + +# Hardware Specifications + +| | | +| --------------- | ------------------------------------------------------------ | +| Vendor/Brand | TP-Link | +| Model | XZ005-G6 (UN) V1.0 | +| Chipset | Realtek RTL9601D | +| Flash | 4 MB (XMC XM25QH32CHIG, 32 Mbit SPI NOR) | +| RAM | 32 MB (embedded) | +| System | Linux (MIPS), U-Boot 2011.12.NA | +| 2.5GBaseT | Yes, 1x 2.5 Gbit/s (PHY Realtek RTL8221B) | +| Optics | SC/APC (laser driver UX3320S) | +| Power | DC 9 V / 600 mA | +| IP address | 192.168.1.1 | +| Web Gui | ✅ no default password (set on first access, see Web Access) | +| SSH | | +| Telnet | ✅ limited TP-Link CLI (see Telnet) | +| Serial | ✅ | +| Form Factor | ONT | + +::: info Note +This is a GPON-only SFU ONT. XGS-PON is not supported. +::: + +# GPON Identifiers + +| | | +| ------------ | --------------------- | +| ONU Type | SFU (Ethernet UNI: 1) | +| Vendor ID | TPLG | +| Equipment ID | XZ005-G6 | +| Version | 1.0 | +| OMCC Version | 128 (0x80) | + +The default GPON authentication parameters logged by the firmware are LOID `tplink`, password `tplink`. + +## List of software versions + +- `V0.1-3.0.0` (`softwareVersion 0.1.0 3.0.0 v6066.0 Build 231212 Rel.36338n`) + +## List of partitions + +The firmware only exposes the configuration partition; the full MTD layout is not documented yet. + +| dev | mount | content | +| --------- | ------------- | ------------------ | +| mtdblock3 | `/var/config` | configuration data | + +The runtime configuration files are `/var/config/lastgood.xml` and `/var/config/lastgood_hs.xml`; factory defaults are `/etc/config_default.xml` and `/etc/config_default_hs.xml`. + +# Web Access + +The device ships **without** default credentials: the password is chosen by the user on first access. + +1. Factory reset by holding the rear reset button for a few seconds. +2. Open `http://192.168.1.1/superadmin` and set (and confirm) the **superadmin** password. +3. Open `http://192.168.1.1` to set the normal **user** password (log out from superadmin first if needed). + +| Role | URL | +| ---------- | ------------------------------- | +| User | `http://192.168.1.1` | +| Superadmin | `http://192.168.1.1/superadmin` | + +The superadmin account unlocks a few extra web settings and a higher-privilege CLI over Telnet. + +# Telnet + +Telnet exposes TP-Link's own (limited) CLI. Once logged in, the following prompts are available: + +```sh +TP-Link> # user EXEC +TP-Link# # privileged EXEC +TP-Link(conf)# # configuration mode +``` + +::: warning Note +Even the superadmin-level Telnet CLI is fairly restricted compared to a full shell. +::: + +# Configuration backup (conf.bin) decryption + +Several GPON/OMCI parameters have no web field but can be changed by exporting the configuration backup, editing it and importing it back. + +The backup (`conf.bin`) is a compressed XML blob encrypted with **DES in ECB mode** (zero-padded to an 8-byte boundary), prefixed by a 16-byte MD5 digest of the compressed payload. Support for this exact model was merged into [`sta-c0000/tpconf_bin_xml`](https://github.com/sta-c0000/tpconf_bin_xml) ([PR #45](https://github.com/sta-c0000/tpconf_bin_xml/pull/45)), so the tool handles compression, hashing and encryption automatically: + +```sh +# decrypt / unpack conf.bin to XML +python3 tpconf_bin_xml.py conf.bin conf.xml + +# edit conf.xml, then pack it back +python3 tpconf_bin_xml.py conf.xml conf.bin +``` + +The DES key used for the `XZ005-G6 (UN) V1.0` is the 8-byte constant: + +``` +45 EE 92 32 CF 5B 1D FE +``` + +::: info Note +The product ID for this variant is `0x1c796e01` (readable at big-endian offset `0x34` of a same-format firmware update file). Early analysis suggested the key was derived by XOR-ing a base key with this product ID, but the merged tool uses the literal key above directly. +::: + +# Known limitations + +The `ONU-G` (hardware) version and the `Software image` version reported over OMCI are forced by the firmware and ignored on config import, so this device is not suitable when those fields need to be edited. + +TP-Link (O3 Labs) states that no custom firmware will be produced for this device: web and OMCI updates require signed images, and while loading an image over serial/UART is possible in principle, it is considerably more involved. + +# References + +- [TP-Link XZ005-G6 (UN) V1.0 — tripleoxygen wiki](https://www.tripleoxygen.net/wiki/ont/tplink/xz005-g6-un-v1) +- [tpconf_bin_xml — configuration backup tool](https://github.com/sta-c0000/tpconf_bin_xml) ([PR #45](https://github.com/sta-c0000/tpconf_bin_xml/pull/45))