diff --git a/ont/ont-tplink-xz005-g6.md b/ont/ont-tplink-xz005-g6.md deleted file mode 100644 index 087b5176..00000000 --- a/ont/ont-tplink-xz005-g6.md +++ /dev/null @@ -1,119 +0,0 @@ ---- -title: TP-Link XZ005-G6 -has_children: false -parent: TP-Link ---- - -# Hardware Specifications - -| | | -| --------------- | ------------------------------------------------------------ | -| Vendor/Brand | TP-Link | -| Model | XZ005-G6 (UN) V1.0 | -| Chipset | Realtek RTL9601D | -| Flash | 4 MB (XMC XM25QH32CHIG, 32 Mbit SPI NOR) | -| RAM | 32 MB (embedded) | -| System | Linux (MIPS), U-Boot 2011.12.NA | -| 2.5GBaseT | Yes, 1x 2.5 Gbit/s (PHY Realtek RTL8221B) | -| Optics | SC/APC (laser driver UX3320S) | -| Power | DC 9 V / 600 mA | -| IP address | 192.168.1.1 | -| Web Gui | ✅ no default password (set on first access, see Web Access) | -| SSH | | -| Telnet | ✅ limited TP-Link CLI (see Telnet) | -| Serial | ✅ | -| Form Factor | ONT | - -::: info Note -This is a GPON-only SFU ONT. XGS-PON is not supported. -::: - -# GPON Identifiers - -| | | -| ------------ | --------------------- | -| ONU Type | SFU (Ethernet UNI: 1) | -| Vendor ID | TPLG | -| Equipment ID | XZ005-G6 | -| Version | 1.0 | -| OMCC Version | 128 (0x80) | - -The default GPON authentication parameters logged by the firmware are LOID `tplink`, password `tplink`. - -## List of software versions - -- `V0.1-3.0.0` (`softwareVersion 0.1.0 3.0.0 v6066.0 Build 231212 Rel.36338n`) - -## List of partitions - -The firmware only exposes the configuration partition; the full MTD layout is not documented yet. - -| dev | mount | content | -| --------- | ------------- | ------------------ | -| mtdblock3 | `/var/config` | configuration data | - -The runtime configuration files are `/var/config/lastgood.xml` and `/var/config/lastgood_hs.xml`; factory defaults are `/etc/config_default.xml` and `/etc/config_default_hs.xml`. - -# Web Access - -The device ships **without** default credentials: the password is chosen by the user on first access. - -1. Factory reset by holding the rear reset button for a few seconds. -2. Open `http://192.168.1.1/superadmin` and set (and confirm) the **superadmin** password. -3. Open `http://192.168.1.1` to set the normal **user** password (log out from superadmin first if needed). - -| Role | URL | -| ---------- | ------------------------------- | -| User | `http://192.168.1.1` | -| Superadmin | `http://192.168.1.1/superadmin` | - -The superadmin account unlocks a few extra web settings and a higher-privilege CLI over Telnet. - -# Telnet - -Telnet exposes TP-Link's own (limited) CLI. Once logged in, the following prompts are available: - -```sh -TP-Link> # user EXEC -TP-Link# # privileged EXEC -TP-Link(conf)# # configuration mode -``` - -::: warning Note -Even the superadmin-level Telnet CLI is fairly restricted compared to a full shell. -::: - -# Configuration backup (conf.bin) decryption - -Several GPON/OMCI parameters have no web field but can be changed by exporting the configuration backup, editing it and importing it back. - -The backup (`conf.bin`) is a compressed XML blob encrypted with **DES in ECB mode** (zero-padded to an 8-byte boundary), prefixed by a 16-byte MD5 digest of the compressed payload. Support for this exact model was merged into [`sta-c0000/tpconf_bin_xml`](https://github.com/sta-c0000/tpconf_bin_xml) ([PR #45](https://github.com/sta-c0000/tpconf_bin_xml/pull/45)), so the tool handles compression, hashing and encryption automatically: - -```sh -# decrypt / unpack conf.bin to XML -python3 tpconf_bin_xml.py conf.bin conf.xml - -# edit conf.xml, then pack it back -python3 tpconf_bin_xml.py conf.xml conf.bin -``` - -The DES key used for the `XZ005-G6 (UN) V1.0` is the 8-byte constant: - -``` -45 EE 92 32 CF 5B 1D FE -``` - -::: info Note -The product ID for this variant is `0x1c796e01` (readable at big-endian offset `0x34` of a same-format firmware update file). Early analysis suggested the key was derived by XOR-ing a base key with this product ID, but the merged tool uses the literal key above directly. -::: - -# Known limitations - -The `ONU-G` (hardware) version and the `Software image` version reported over OMCI are forced by the firmware and ignored on config import, so this device is not suitable when those fields need to be edited. - -TP-Link (O3 Labs) states that no custom firmware will be produced for this device: web and OMCI updates require signed images, and while loading an image over serial/UART is possible in principle, it is considerably more involved. - -# References - -- [TP-Link XZ005-G6 (UN) V1.0 — tripleoxygen wiki](https://www.tripleoxygen.net/wiki/ont/tplink/xz005-g6-un-v1) -- [tpconf_bin_xml — configuration backup tool](https://github.com/sta-c0000/tpconf_bin_xml) ([PR #45](https://github.com/sta-c0000/tpconf_bin_xml/pull/45))